Home Browse Recent advances on gradient hydrogels in biomimetic cartilage tissue...
ALL Metrics
-
Views
-
Downloads
Get PDF
Get XML
Cite
Export
Track
▬
✚
Review

Recent advances on gradient hydrogels in biomimetic cartilage tissue engineering

[version 1; peer review: 2 approved]
Ivana Gadjanski1,2
Ivana Gadjanski1,2
PUBLISHED 20 Dec 2017
Author details Author details
OPEN PEER REVIEW
REVIEWER STATUS

Abstract

Articular cartilage (AC) is a seemingly simple tissue that has only one type of constituting cell and no blood vessels and nerves. In the early days of tissue engineering, cartilage appeared to be an easy and promising target for reconstruction and this was especially motivating because of widespread AC pathologies such as osteoarthritis and frequent sports-induced injuries. However, AC has proven to be anything but simple. Recreating the varying properties of its zonal structure is a challenge that has not yet been fully answered. This caused the shift in tissue engineering strategies toward bioinspired or biomimetic approaches that attempt to mimic and simulate as much as possible the structure and function of the native tissues. Hydrogels, particularly gradient hydrogels, have shown great potential as components of the biomimetic engineering of the cartilaginous tissue.

Keywords

articular cartilage, tissue engineering, gradient hydrogels

Corresponding author: Ivana Gadjanski
Competing interests: The author participates in a project that has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement 664387.
Grant information: This work was supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia (Projects OI174028 and III41007).
The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Copyright:  © 2017 Gadjanski I. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to cite: Gadjanski I. Recent advances on gradient hydrogels in biomimetic cartilage tissue engineering [version 1; peer review: 2 approved]. F1000Research 2017, 6(F1000 Faculty Rev):2158 (https://doi.org/10.12688/f1000research.12391.1) First published: 20 Dec 2017, 6(F1000 Faculty Rev):2158 (https://doi.org/10.12688/f1000research.12391.1) Latest published: 28 Jun 2018, 6(F1000 Faculty Rev):2158 (https://doi.org/10.12688/f1000research.12391.2)

Introduction

Cartilage and osteochondral (OC) tissue engineering (TE) has two aims: it attempts to (1) reconstruct and repair disturbed cartilage and underlying bone tissue, ideally making the functional OC complex, comprised of cartilage/bone phases connected through the OC interface and (2) generate new OC tissues that can be used for disease modeling and drug discovery1. However, there are a number of challenges in this process and this is primarily due to the very specific characteristics of the cartilage, its zonal structure, and still not fully defined properties of the cartilage-bone interface. The functional properties of cartilage and the cartilage-bone interface (in the context of the zones) are particularly challenging to achieve; if the function is not fully restored in the engineered tissue with the appropriate zones, then the new tissue is at risk of being damaged. Thus, there is a need to develop new strategies to help direct cells to form the zones of the tissue.

Use of gradient hydrogels, biomaterials with spatiotemporally varying physical and chemical properties, has proven to be one of the most promising approaches and is in line with the biomimetic strategy in TE. This review will focus on recent advances in the use of gradient hydrogels in cartilage TE. However, it should be emphasized that implementation of biomimetic hydrogels is a fast-growing field and has great potential for clinical application. It is nearly impossible to give a concise yet thorough review of such an expanding field. Hence, the readers are invited to regard the provided information as the concise overview of some of the most innovative recent approaches in the fabrication and implementation of gradient hydrogels for cartilage TE.

Why is cartilage difficult to repair and reconstruct?

Cartilage heals very poorly on its own and this is primarily due to its avascular nature. It has a low number of constituting cells—chondrocytes—which make up only 5% of total cartilage volume2 and are enclosed in a unique cartilaginous extracellular matrix (ECM), made of collagen fibers pre-stressed by osmotic swelling pressure exerted by negatively charged proteoglycans embedded in the collagen network3. ECM makes up about 25% of the total volume of cartilage and is a dynamic structure, providing mechanical support as well as growth factors and cytokines secreted by the cells. The rest of the roughly 70% of the wet weight of cartilage tissue is attributable to water, which is responsible for cartilage’s unique biomechanics, flexibility, reversible deformation ability, and strength4. Owing to its avascular nature, native cartilage is hypoxic and has a spatial oxygen gradient of less than 1% in the deepest zones and up to less than 10% at the surface5,6. Zonality of the cartilage is reflected in both the chondrocyte morphology and the ECM organization (collagen type II decreases from the superficial zone to the deep calcified cartilage, while the levels of collagen type X, proteoglycans, and sulphated glycosaminoglycans (sGAGs) increase2), which has been very difficult to achieve in the engineered constructs. The cartilage-bone interface is another feature of the OC complex that has been notoriously challenging to engineer. These challenges reflect the very gist of the biomimetic approach in TE, which can be summarized as the attempt to generate a tissue construct with structure and function as similar as possible to those of the native, biological counterpart.

One of the best strategies for achieving biomimetic zonality in the engineered cartilage tissue is to use gradient hydrogels, which can provide spatiotemporal gradients of multiple physical cues (for example, ECM stiffness and porosity) and biochemical cues (for example, morphogens)1. As for the bone phase in the OC construct, hydrogels are not the primary choice and this is due to their low mechanical stiffness7; hybrid scaffolds—hydrogels for the cartilaginous phase and rigid, porous scaffolds for the bone region—are used instead2,8. The cellular components of the construct comprise either primary cells (chondrocytes for the cartilaginous phase and osteoprogenitors for the osseous part) or stem/stromal cells, preferably autologous, that can be isolated from various tissues induced to chondrogenesis/osteogenesis9. Mesenchymal stromal/stem cells (SCs) are currently viewed as the cell type of choice—particularly adipose-derived cells because of the relative ease of extraction from the fat tissue—for potential clinical treatments10. There are two modes of cell integration to hydrogels: cells seeded on the hydrogel surface (2D approach) or encapsulation of cells within the hydrogel (3D approach).

What are hydrogels?

Hydrogels are polymeric networks that can absorb a large quantity of water or any fluid (up to 95–99% of their weight). They are biomimetic per se since their high water content and diffusive transport properties very closely resemble those of the natural ECM11. The majority of hydrogels are also biocompatible, such as the ones based on natural polymers—agarose, alginate, chitosan, collagen, fibrin, gelatin, hyaluronic acid, dextran, silk, and matrigel12—as well as synthetic gels based on poly(ethylene glycol) (PEG), poly(vinyl alcohol) (PVA), poly(propylene fumarate), polyacrylic acid (PAA), and poly(hydroxyethyl methacrylate) (PHEMA)13. An additional characteristic of hydrogels, very useful in TE and regenerative medicine, is their high potential for functionalization, which renders them easy to customize for improved cell-adhesion options and mechanical properties or sustained release of growth factors, cytokines, and drugs14.

There are different kinds of hydrogels: (a) physical or reversible gels, where the network of polymers is based on the physical cross-links such as micellar crystallites, helix formation, hydrogen bonding, or hydrophobic forces, which can be ‘broken’ (reversed) by changing of the conditions (pH, temperature, salt concentration and ionic strength of the solution)15, and (b) chemical or permanent gels, where the cross-linked polymers are covalently bound. An important fact for cartilage TE is that hydrogels possess tunable mechanical properties, which are related to the degree of cross-linking and affected by the presence and amount of charge. Charged hydrogels undergo changes in swelling related to pH status and in shape if exposed to the electromagnetic field16. A very interesting recent study by Offeddu et al. investigated the difference in mechanical response and morphology of physically cross-linked PVA and PAA cryogels (structures obtained by repeated freezing and thawing of the polymer solution) versus heat-treated chemical gels made from the same polymers, as a result of pH-dependent swelling17. The elastic modulus of the physical cryogels, in contrast to that of the heat-treated chemically cross-linked gels, was found to increase with charge activation and swelling and this was explained by the occurrence of electrostatic stiffening of the polymer chains at large charge densities17. This is one of the first studies to report such cartilage-like mechanical behavior of hydrogels. In this context, it is important to mention that induced hydrogel swelling can also destabilize immature collagen in the newly engineered construct, preventing it from developing into the robust ECM-like collagen framework characteristic of native cartilage. The Vunjak-Novakovic, Hung, and Ateshian group hypothesized that this problem can be overcome by mechanically constraining the tissue swelling18. To this aim, they developed a novel constraint-based culture system—a ‘cage’ which enhanced collagen maturation through the increased formation of pyridinoline cross-links and improved collagen matrix stability.

Gradient hydrogels

A broad definition of a ‘gradient hydrogel’ is a hydrogel possessing a gradual and continuous spatiotemporal change in at least one property19. Gradient hydrogels are excellent tools for engineering the native-like, biomimetic, cellular microenvironment. They also allow analyses of a wide spectrum of property values in a single sample and this is well suited for high-throughput screening20. Gradients can be physical or biochemical or a combination of the two and have a temporal component as well. Gradient hydrogels can be generated via various methods that usually involve inducing cross-linking of the precursor solution, such as photopolymerization, the enzyme-catalyzed method, and temperature-induced gradient12. To achieve gradient via photopolymerization, a photomask is used to block the ultraviolet (UV) light and subsequently prevent cross-linking on the covered region of the gel. The mask can be stationary or sliding. With the latter, first the whole polymer gets exposed to UV light and then the mask gradually covers the entire gel, moving in a linear fashion from one end. For example, if the cross-linking increases stiffness, the first covered hydrogel region will be most elastic while the last covered region, which was exposed to UV light for the longest time, undergoes a higher degree of cross-linking and is most stiff. In this way, the stiffness gradient is achieved21. Enzymatic preparation of hydrogels comprises the use of enzyme systems such as tyrosinases, transferases, and peroxidases that catalyze covalent cross-linking of hydrogel precursors. These reactions can be performed in situ—where the gel precursors with bioactive substance are administered via a syringe locally, at the site where the gelation should be induced (for example, at the wound site)—and are particularly useful for generating dynamic scaffolds and systems for controlled release22. Enzyme-catalyzed mild cross-linking has several advantages over UV-mediated photopolymerization, such as its very low cytotoxicity. Low toxicity is due to the fact that majority of the used enzymes are naturally occurring and the reactions are catalyzed at physiological conditions—neutral pH, moderate temperatures, in aqueous solution. Enzymatic gelation can also be combined with light-triggered chemical immobilization to achieve hydrogel patterning and gradient23. This can be performed in situ as well. Mosiewicz et al., from the Lutolf group, describe how they achieved highly localized spatial patterning and tethering of a biomolecule of interest24. They induced photosensitivity of a peptide substrate of activated transglutaminase factor XIII (FXIIIa), a key ECM cross-linking enzyme, by masking its active site with a photolabile cage group. Such a caged, inactive enzymatic peptide substrate was covalently incorporated into a PEG hydrogel. Localized cleavage of the cage and reactivation of the enzyme substrate were achieved by controlled light exposure from a confocal laser. Subsequent FXIIIa reaction of the uncaged substrate with a counter-reactive substrate on a biomolecule of interest allowed covalent biomolecule tethering in a highly localized, user-defined pattern24.

The gradient in nanocomposite hydrogels (hydrogels with integrated nanomaterials characterized by higher elasticity and strength in comparison with traditional hydrogels25,26) can be induced before the cross-linking, by the application of electric or magnetic field. Microfluidics, additive manufacturing (AM), and microsphere-based approaches are also very efficient methods of generating gradients. A number of excellent reviews give a detailed overview of methods to generate gradient hydrogels in view of their relevance to TE in general1,20,27. Here, we focus on gradient hydrogels for cartilage TE and give representative references to the innovative approaches used for their fabrication and implementation.

Physical gradients

Physical gradients are mechanical gradients (variations in stiffness—that is, Young’s modulus values), density, strain/stress, and porosity/pore size gradients. Recently, AM techniques gained popularity for the fabrication of physical gradients. These include stereolithography, fused deposition modeling, selective laser sintering, inkjet, and extrusion bioprinting28,29. A very good review by Bracaglia et al. provides details on each of the AM methods as well as methods for the evaluation of established physical gradients such as micro-computed tomography28.

Zhu et al. proposed a hypothesis that stiffness gradient can induce a zonal-specific response of encapsulated cells in 3D, where the newly deposited tissues in gradient hydrogels will mimic the zonal organization of native articular cartilage30. To test this hypothesis, they used a tissue-scale, photo-cross-linkable, multi-arm PEG hydrogel system as a backbone and chondroitin sulfate methacrylate, mixed with two cell-containing precursor solutions: neonatal bovine chondrocytes or human mesenchymal stromal cells (hMSCs). In this way, they fabricated 3D gradient hydrogels divided into zones 1–5 by the increasing stiffness ranging from 2 to 60 kPa, obtained by using two precursor solutions containing 2% (wt/vol) and 20% (wt/vol) PEG. The results showed that chondrocytes encapsulated in gradient hydrogels exhibited a native-like ECM distribution, and larger nodules of type II collagen were observed in zone 1 and larger sGAG nodules in zone 5. The chondrocytes were more hypertrophic as the stiffness increased from zone 1 to zone 5. Increasing matrix stiffness led to a stiffness-dependent increase in cartilage-specific gene expression by hMSCs, and there was a two- to three-fold higher expression of the genes encoding aggrecan and type II collagen in the stiffer zone (zone 5) compared with the softer zone (zone 1)30. More details on the gradient stiffness hydrogel fabrication methods and mechanical property tests can be found in a recent review by Xia et al.31.

Ren et al. also engineered zonal cartilage by bioprinting collagen type II hydrogel constructs with a biomimetic cell density gradient32. They bioprinted two types of hydrogel/cell construct: one with a biomimetic chondrocyte density gradient—the ratio of chondrocyte densities in the superficial zone (top 10%) to the transitional zone (middle 10%) to the deep zone (remaining 80%) of normal adult human articular cartilage is approximately 3:2:1, which the authors achieved in their constructs, and the ratio of the three zonal volumes was 13%:13%:74%—and the other type with a homogenous cell density, equal to the total cell density of 1 × 107 cells/mL. This amount was chosen since this is the total cell density within the articular cartilage of the human medial femoral condyle33. As a result, the cell density gradient distribution was reflected in a zonal ECM distribution.

Porosity. Even though most hydrogels that are used for TE and cell encapsulation facilitate diffusive transport of oxygen and many nutrients, and thus do not need pores, pores can offer the ability to fabricate hydrogels first and then seed them with cells26. Porous hydrogels can be fabricated in several ways: (i) by making the gel network with encased biodegradable blocks34, (ii) by making hydrogel fibers via electrospinning or 3D bioprinting28,35, (iii) through the application of porogens such as polymer microspheres36,37, or (iv) with the 3D laser perforation38. Under mechanical loading, a strain gradient also exists in hydrogel scaffolds; the superficial hydrogel layer absorbs more strain than the middle and deep layers39.

A combination of methods is frequently implemented for making physical gradients, particularly for composite hydrogels. Su et al. used an electrophoresis method to induce hydroxyapatite (HA) nanoparticles within the matrix of PVA hydrogels prepared by a directional freezing-thawing (DFT) process. By controlling the time of the electrophoresis process, they obtained a bilayered gradient hydrogel containing HA particles in only half of the gel region. The PVA/HA composite hydrogel exhibited physical gradient (mechanical strength) depending on the distance to the cathode40,41. PVA/HA combination yields multilayered composite material with rheological properties similar to those of natural cartilage41. This method holds promise to be more efficient than mentioned above for generation of physical gradients.

Physical gradients are very important when engineering the OC interface, which is the junction between the cartilaginous and bone phase. Cross et al. report a gradient scaffold with two natural polymers—gelatin methacryloyl (GelMA) and methacrylated kappa carrageenan (MκCA)—reinforced with 2D nanosilicates to mimic the native tissue interface42. The addition of nanosilicates results in shear-thinning characteristics of prepolymer solution and increases the mechanical stiffness of cross-linked gradient structure. A gradient in mechanical properties, microstructures, and cell adhesion characteristics was obtained by using a microengineered flow channel42. They also achieved cell morphology gradient since the hMSCs encapsulated in the MκCA and GelMA hydrogels gained chondrocyte- and osteoblast-like morphology, respectively. At the interface regions, both of the cell morphologies were present. Such a structure not only can effectively mimic the native interface but also can provide a seamless connection between the cartilage and bone phase of the whole OC construct.

Recreating the physical microenvironment as well as cell-matrix interactions is crucial during the differentiation of mesenchymal progenitors. In this context, it is important to mention the work of the Burdick group on the ‘HAVDI’ hydrogels (that is, the methacrylated hyaluronic acid [MeHA] hydrogel system that, across a physiological range of ECM stiffness, enables the independent co-presentation of the HAVDI adhesive motif from the EC1 domain of N-cadherin and the RGD adhesive motif from fibronectin)43. The HAVDI hydrogels are particularly interesting since they also provide specific cell-material interactions; namely, they give the option for the mesenchymal stem/stromal cells to interact with the MeHA backbone polymer through several cell surface receptors that are expressed by MSCs, including CD44 and CD16844.

Another aspect of cell-matrix interactions which needs to be recapitulated in the engineered construct is the cell-triggered proteolysis of the ECM, which is mediated by the members of the metalloproteinase (MMP) family45. The Lutolf group engineered synthetic PEG-based hydrogels with a combination of cross-linking MMP substrates, as linkers between PEG chains and cell adhesion oligopeptide ligands (RGDSP), and showed in vitro and in vivo in the models for bone regeneration that such hydrogels can undergo cell-mediated proteolytic degradation followed by the remodeling into a cell-secreted bone matrix at the site of the injury46.

Biochemical gradients

Biochemical gradients are gradients in concentration of the bioactive molecules—morphogens (growth and transcription factors, chemokines, and cytokines). As mentioned earlier, biocompatible hydrogels based on natural and some synthetic polymers possess inherent bioactive properties, which can be enhanced through functionalization, such as covalent binding of peptides and proteins47 or exopolysaccharides48 to the hydrogel polymers, or with additional affinity binding achieved by adding, for example, collagen binding sequences to the peptide/protein to be incorporated into the hydrogel49. Synthetic hydrogels are usually functionalized in the direction of achieving better cell adhesion by introducing cell-adhesive ligands such as RGD(S) peptide, the key component of the cell attachment domain of fibronectin7.

Functionalization can also provide temporal gradients—time-specific presentation of bioactive sequences/molecules. In an innovative study, Parmar et al. used MMP7-functionalized recombinant bacterial collagens—streptococcal collagen-like 2 (Scl2) proteins—to enable temporal presentation of RGDS peptide and fine-tune the chondrogenic differentiation of hMSCs50. The RGDS binding sites were sequentially enzymatically released from the hydrogel via the MMP7-cleavable peptides used for functionalization50. The rationale was based on previous studies that the persistence of the RGD peptide expression can delay or alter chondrogenic differentiation of hMSCs, often leading to hypertrophy51.

Gradients of growth factors are among the crucial components in biomimetic cartilage TE. The key growth factors are the members of the transforming growth factor-beta (TGF-β) superfamily (including bone morphogenetic proteins [BMPs]52 and growth and differentiation factors53), fibroblast growth factor (FGF) family, and insulin-like growth factor-I (IGF-I). During in vivo chondrogenesis, these factors are expressed in a time-dependent manner6. This can be simulated in vitro by the sequential application to the cell culture—for example, basic FGF or FGF2 followed by BMP2 or IGF1, TGFβ2, or TGFβ36,54—or through the growth factor gradient in the hydrogel scaffold. One of the hallmark studies in establishing growth factor gradients in hydrogel scaffolds for OC engineering is by Wang et al., who used microsphere-mediated growth factor delivery in polymer scaffolds and evaluated the impact on OC differentiation of hMSCs55. They used two recombinant human growth factors (rhBMP-2 and rhIGF-I) and tested delivery efficiency of polylactic-co-glycolic acid (PLGA) and silk fibroin microspheres incorporated as gradients into an alginate hydrogel. Both growth factors formed deep and linear concentration gradients in the scaffold directing hMSCs to osteogenic and chondrogenic differentiation along the concentration gradients, which led to formation of zonality in the engineered construct55. A very good recent review by Gupta et al.36 provides more details on the microsphere-based scaffolds that followed after the described study56.

In addition to microsphere-based methods for generating biochemical gradients, methods such as layer-by-layer, prepolymer mixing, or modular assembly are tested, and AM methods are gaining ground in generating biochemical gradients, similarly as for the physical gradients28. The microfluidic-based generators with precise fluid control are also implemented, as either mono-phase or droplet-based methods57. A detailed review by Samorezov and Alsberg provides more information on strategies and methods for spatiotemporal control over bioactive factor delivery, concerning both generating patterns of bioactive factors on scaffold surfaces and building up patterned 3D scaffolds58.

Dual gradients of mechanical and biochemical cues

SCs are being increasingly used in cartilage TE59. To direct SC differentiation or influence SC production of the autocrine/paracrine factors or both, one needs to provide a niche effect—a microenvironment with multiple biochemical and physical factors. To this aim, Tong et al. describe a multi-arm PEG-based gradient hydrogel platform as a biomimetic cell niche containing independently tunable matrix stiffness and biochemical ligand (CRGDS peptide) density60. They introduced both gradients—first the mechanical one and then the chemical one—using a gradient of UV exposure over the precursor solution and over hydrogels with established mechanical gradients, respectively60. This system is intended for general use and is not focused on cartilage. Tam et al. created a biomimetic 3D cell culture with dual biochemical and physical gradients by using photosensitive agarose and hyaluronic acid hydrogels that are activated by single- or two-photon irradiation for biomolecule immobilization at specific volumes within the 3D hydrogel61. This platform has been optimized for modeling the nervous system and cancer61. Other attempts to provide dual biochemical and physical gradients have been made by using microfluidic platforms62. However, the micro-scale platforms are not well suited for establishing gradient hydrogels in clinically relevant tissue constructs. Up to now, the most promising approach for generating dual large-scale (that is, tissue-scale) gradient hydrogels in the context of cartilage TE is the method (described above) by Zhu et al.30.

Future challenges

Fabrication of gradient hydrogels has significantly advanced in recent years. However, a number of challenges are still associated with their use as one of the components in biomimetic cartilage TE. This is especially true concerning the potential clinical application, which would require large-scale constructs with fully native-like zonal composition, structure, and functions. Even though many of the described methods can already create centimeter-scale implants with gradients (for example, layered hydrogels, grayscale masks with photopolymerization, and porosity), it is still not possible to completely mimic the natural zonality and microenvironment of the articular cartilage. Another aspect to consider is to specify the best hydrogel degradation parameters since it is still challenging to match the degradation of hydrogels with the growth of cartilage and OC tissues63.

Other challenges include methods for establishing more efficient temporal gradients that would provide more native-like gene expression during engineered cartilage formation, which is still an issue as evidenced by the lack of a mature chondrocyte-like phenotype in the hMSC-engineered constructs6. Good tools to further investigate the response of SCs to lineage-guiding metabolites are the tunable supramolecular hydrogels. Supramolecular hydrogels are macromolecular polymers stabilized by noncovalent bonds (for example, hydrogen bond, hydrophobic interaction cation–π, and π–π interactions) into a solid 3D network64. The Ulijn group generated supramolecular hydrogels composed of fibers with cytocompatible surface functionality and tunable network densities that can help in selection of bioactive metabolites that can specifically target bone and cartilage formation65,66.

We still need to develop efficient ways of generating gradients of other important bioactive molecules, such as oxygen tension gradient67 and gradients of insulin, ascorbate, and glucose68. Another interesting aspect is establishing gradients of ‘raw materials’ such as chondroitin sulfate incorporated into the hydrogel69–71. Also, more work needs to be done on control of the localized molecular orientation, such as different alignments of collagen fibers in cartilage zones16.

In conclusion, physical patterning is not sufficient to recreate the zones, and the combination of physical and chemical cues as well as a more sophisticated understanding of the biology will be needed to create successful gradients for cartilage TE.

Abbreviations

AM, additive manufacturing; BMP, bone morphogenetic protein; ECM, extracellular matrix; FGF, fibroblast growth factor; FXIIIa, activated transglutaminase factor XIII; GelMA, gelatin methacryloyl; HA, hydroxyapatite; HAVDI, His-Ala-Val-Asp-Lle; hMSC, human mesenchymal stromal cell; IGF-I, insulin-like growth factor-I; MκCA, methacrylated kappa carrageenan; MeHA, methacrylated hyaluronic acid; MMP, metalloproteinase; MSC, mesenchymal stromal cell; OC, osteochondral; PAA, polyacrylic acid; PEG, poly(ethylene glycol); PVA, poly(vinyl alcohol); RGD, Arg-Gly-Asp; RGDS, Arg-Gly-Asp-Ser; SC, stem cell; sGAG, sulphated glycosaminoglycan; TE, tissue engineering; TGF-β, transforming growth factor-beta; UV, ultraviolet.

Competing interests

The author participates in a project that has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement 664387.

Grant information

This work was supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia (Projects OI174028 and III41007).

The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

F1000 recommended

References

  • 1.  Wang L, Li Y, Huang G, et al.: Hydrogel-based methods for engineering cellular microenvironment with spatiotemporal gradients. Crit Rev Biotechnol. 2016; 36(3): 553–65. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 2.  Yousefi AM, Hoque ME, Prasad RG, et al.: Current strategies in multiphasic scaffold design for osteochondral tissue engineering: A review. J Biomed Mater Res A. 2015; 103(7): 2460–81. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 3.  Horkay F: Interactions of Cartilage Extracellular Matrix Macromolecules. J Polym Sci B Polym Phys. 2012; 50(24): 1699–705. PubMed Abstract | Publisher Full Text | Free Full Text
  • 4.  Oliveira JM, Reis RL: Regenerative Strategies for the Treatment of Knee Joint Disabilities. Springer, 2016. Publisher Full Text
  • 5.  Malda J, Martens DE, Tramper J, et al.: Cartilage tissue engineering: controversy in the effect of oxygen. Crit Rev Biotechnol. 2003; 23(3): 175–94. PubMed Abstract | Publisher Full Text
  • 6.  Gadjanski I, Spiller K, Vunjak-Novakovic G: Time-dependent processes in stem cell-based tissue engineering of articular cartilage. Stem Cell Rev. 2012; 8(3): 863–81. PubMed Abstract | Publisher Full Text | Free Full Text
  • 7.  Moreira Teixeira LS, Patterson J, Luyten FP: Skeletal tissue regeneration: where can hydrogels play a role? Int Orthop. 2014; 38(9): 1861–76. PubMed Abstract | Publisher Full Text
  • 8.  Camarero-Espinosa S, Cooper-White J: Tailoring biomaterial scaffolds for osteochondral repair. Int J Pharm. 2017; 523(2): 476–89. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 9.  Vunjak-Novakovic G: Tissue engineering strategies for skeletal repair. HSS J. 2012; 8(1): 57–8. PubMed Abstract | Publisher Full Text | Free Full Text
  • 10.  Vonk LA, de Windt TS, Slaper-Cortenbach IC, et al.: Autologous, allogeneic, induced pluripotent stem cell or a combination stem cell therapy? Where are we headed in cartilage repair and why: a concise review. Stem Cell Res Ther. 2015; 6: 94. PubMed Abstract | Publisher Full Text | Free Full Text | F1000 Recommendation
  • 11.  Spiller KL, Maher SA, Lowman AM: Hydrogels for the repair of articular cartilage defects. Tissue Eng Part B Rev. 2011; 17(4): 281–99. PubMed Abstract | Publisher Full Text | Free Full Text
  • 12.  Vega SL, Kwon MY, Burdick JA: Recent advances in hydrogels for cartilage tissue engineering. Eur Cell Mater. 2017; 33: 59–75. PubMed Abstract | Publisher Full Text
  • 13.  Hunt JA, Chen R, van Veen T, et al.: Hydrogels for tissue engineering and regenerative medicine. J Mater Chem B. 2014; 2(33): 5319–38. Publisher Full Text
  • 14.  Buwalda SJ, Vermonden T, Hennink WE: Hydrogels for Therapeutic Delivery: Current Developments and Future Directions. Biomacromolecules. 2017; 18(2): 316–30. PubMed Abstract | Publisher Full Text
  • 15.  Caló E, Khutoryanskiy VV: Biomedical applications of hydrogels: A review of patents and commercial products. European Polymer Journal. 2015; 65: 252–67. Publisher Full Text
  • 16.  Takahashi R, Wu ZL, Arifuzzaman M, et al.: Control superstructure of rigid polyelectrolytes in oppositely charged hydrogels via programmed internal stress. Nat Commun. 2014; 5: 4490. PubMed Abstract | Publisher Full Text
  • 17.  Offeddu GS, Mela I, Jeggle P, et al.: Cartilage-like electrostatic stiffening of responsive cryogel scaffolds. Sci Rep. 2017; 7: 42948. PubMed Abstract | Publisher Full Text | Free Full Text | F1000 Recommendation
  • 18.  Nims RJ, Cigan AD, Durney KM, et al.: * Constrained Cage Culture Improves Engineered Cartilage Functional Properties by Enhancing Collagen Network Stability. Tissue Eng Part A. 2017; 23(15–16): 847–58. PubMed Abstract | Publisher Full Text | Free Full Text | F1000 Recommendation
  • 19.  Genzer J, Bhat RR: Surface-bound soft matter gradients. Langmuir. 2008; 24(6): 2294–317. PubMed Abstract | Publisher Full Text
  • 20.  Sant S, Hancock MJ, Donnelly JP, et al.: BIOMIMETIC GRADIENT HYDROGELS FOR TISSUE ENGINEERING. Can J Chem Eng. 2010; 88(6): 899–911. PubMed Abstract | Publisher Full Text | Free Full Text
  • 21.  Hudalla GH, Murphy WL: Mimicking the Extracellular Matrix: The Intersection of Matrix Biology and Biomaterials. Royal Society of Chemistry. 2015. Reference Source
  • 22.  Teixeira LS, Feijen J, van Blitterswijk CA, et al.: Enzyme-catalyzed crosslinkable hydrogels: emerging strategies for tissue engineering. Biomaterials. 2012; 33(5): 1281–90. PubMed Abstract | Publisher Full Text
  • 23.  Yi Z, Zhang Y, Kootala S, et al.: Hydrogel patterning by diffusion through the matrix and subsequent light-triggered chemical immobilization. ACS Appl Mater Interfaces. 2015; 7(2): 1194–206. PubMed Abstract | Publisher Full Text
  • 24.  Mosiewicz KA, Kolb L, van der Vlies AJ, et al.: In situ cell manipulation through enzymatic hydrogel photopatterning. Nat Mater. 2013; 12(11): 1072–8. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 25.  Song F, Li X, Wang Q, et al.: Nanocomposite Hydrogels and Their Applications in Drug Delivery and Tissue Engineering. J Biomed Nanotechnol. 2015; 11(1): 40–52. PubMed Abstract | Publisher Full Text
  • 26.  Asadi N, Alizadeh E, Salehi R, et al.: Nanocomposite hydrogels for cartilage tissue engineering: a review. Artif Cells Nanomed Biotechnol. 2017; 1–7. PubMed Abstract | Publisher Full Text
  • 27.  Scaffaro R, Lopresti F, Maio A, et al.: Development of polymeric functionally graded scaffolds: a brief review. J Appl Biomater Funct Mater. 2017; 15(2): e107–e121. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 28.  Bracaglia LG, Smith BT, Watson E, et al.: 3D printing for the design and fabrication of polymer-based gradient scaffolds. Acta Biomater. 2017; 56: 3–13. PubMed Abstract | Publisher Full Text | Free Full Text | F1000 Recommendation
  • 29.  You F, Eames BF, Chen X: Application of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering. Int J Mol Sci. 2017; 18(7): pii: E1597. PubMed Abstract | Publisher Full Text | Free Full Text
  • 30.  Zhu D, Tong X, Trinh P, et al.: Mimicking Cartilage Tissue Zonal Organization by Engineering Tissue-Scale Gradient Hydrogels as 3D Cell Niche. Tissue Eng Part A. 2017. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 31.  Xia T, Liu W, Yang L: A review of gradient stiffness hydrogels used in tissue engineering and regenerative medicine. J Biomed Mater Res A. 2017; 105(6): 1799–812. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 32.  Ren X, Wang F, Chen C, et al.: Engineering zonal cartilage through bioprinting collagen type II hydrogel constructs with biomimetic chondrocyte density gradient. BMC Musculoskelet Disord. 2016; 17: 301. PubMed Abstract | Publisher Full Text | Free Full Text | F1000 Recommendation
  • 33.  Hunziker EB, Quinn TM, Häuselmann HJ: Quantitative structural organization of normal adult human articular cartilage. Osteoarthr Cartil. 2002; 10(7): 564–72. PubMed Abstract | Publisher Full Text
  • 34.  Zhao W, Jin X, Cong Y, et al.: Degradable natural polymer hydrogels for articular cartilage tissue engineering. J Chem Technol Biotechnol. 2013; 88(3): 327–39. Publisher Full Text
  • 35.  Murphy SV, Atala A: 3D bioprinting of tissues and organs. Nat Biotechnol. 2014; 32(8): 773–85. PubMed Abstract | Publisher Full Text
  • 36.  Gupta V, Khan Y, Berkland CJ, et al.: Microsphere-Based Scaffolds in Regenerative Engineering. Annu Rev Biomed Eng. 2017; 19: 135–61. PubMed Abstract | Publisher Full Text
  • 37.  Fan C, Wang DA: Macroporous Hydrogel Scaffolds for Three-Dimensional Cell Culture and Tissue Engineering. Tissue Eng Part B Rev. 2017; 23(5): 451–61. PubMed Abstract | Publisher Full Text
  • 38.  Ahrem H, Pretzel D, Endres M, et al.: Laser-structured bacterial nanocellulose hydrogels support ingrowth and differentiation of chondrocytes and show potential as cartilage implants. Acta Biomater. 2014; 10(3): 1341–53. PubMed Abstract | Publisher Full Text
  • 39.  Brady MA, Talvard L, Vella A, et al.: Bio-inspired design of a magnetically active trilayered scaffold for cartilage tissue engineering. J Tissue Eng Regen Med. 2017; 11(4): 1298–302. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 40.  Su C, Su Y, Li Z, et al.: In situ synthesis of bilayered gradient poly(vinyl alcohol)/hydroxyapatite composite hydrogel by directional freezing-thawing and electrophoresis method. Mater Sci Eng C Mater Biol Appl. 2017; 77: 76–83. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 41.  Yuan F, Ma M, Lu L, et al.: Preparation and properties of polyvinyl alcohol (PVA) and hydroxylapatite (HA) hydrogels for cartilage tissue engineering. Cell Mol Biol (Noisy-le-grand). 2017; 63(5): 32–5. PubMed Abstract | Publisher Full Text
  • 42.  Cross LM, Shah K, Palani S, et al.: Gradient nanocomposite hydrogels for interface tissue engineering. Nanomedicine. 2017; pii: S1549-9634(17)30087-4. PubMed Abstract | Publisher Full Text | Free Full Text | F1000 Recommendation
  • 43.  Cosgrove BD, Mui KL, Driscoll TP, et al.: N-cadherin adhesive interactions modulate matrix mechanosensing and fate commitment of mesenchymal stem cells. Nat Mater. 2016; 15(12): 1297–306. PubMed Abstract | Publisher Full Text | Free Full Text | F1000 Recommendation
  • 44.  Bian L, Guvendiren M, Mauck RL, et al.: Hydrogels that mimic developmentally relevant matrix and N-cadherin interactions enhance MSC chondrogenesis. Proc Natl Acad Sci U S A. 2013; 110(25): 10117–22. PubMed Abstract | Publisher Full Text | Free Full Text
  • 45.  Lutolf MP, Hubbell JA: Synthetic biomaterials as instructive extracellular microenvironments for morphogenesis in tissue engineering. Nat Biotechnol. 2005; 23(1): 47–55. PubMed Abstract | Publisher Full Text
  • 46.  Lutolf MP, Weber FE, Schmoekel HG, et al.: Repair of bone defects using synthetic mimetics of collagenous extracellular matrices. Nat Biotechnol. 2003; 21(5): 513–8. PubMed Abstract | Publisher Full Text
  • 47.  Hesse E, Freudenberg U, Niemietz T, et al.: PEPTIDE-FUNCTIONALISED CELL INSTRUCTIVE HYDROGEL SYSTEM FOR CARTILAGE TISSUE ENGINEERING. Bone Joint J. 2017; 99(SUPP 1): 82. Reference Source
  • 48.  Rederstorff E, Rethore G, Weiss P, et al.: Enriching a cellulose hydrogel with a biologically active marine exopolysaccharide for cell-based cartilage engineering. J Tissue Eng Regen Med. 2017; 11(4): 1152–64. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 49.  Hesse E, Freudenberg U, Niemietz T, et al.: Peptide-functionalized starPEG/heparin hydrogels direct mitogenicity, cell morphology and cartilage matrix distribution in vitro and in vivo. J Tissue Eng Regen Med. 2017. PubMed Abstract | Publisher Full Text
  • 50.  Parmar PA, St-Pierre JP, Chow LW, et al.: Enhanced articular cartilage by human mesenchymal stem cells in enzymatically mediated transiently RGDS-functionalized collagen-mimetic hydrogels. Acta Biomater. 2017; 51: 75–88. PubMed Abstract | Publisher Full Text | Free Full Text
  • 51.  Salinas CN, Anseth KS: The enhancement of chondrogenic differentiation of human mesenchymal stem cells by enzymatically regulated RGD functionalities. Biomaterials. 2008; 29(51): 2370–7. PubMed Abstract | Publisher Full Text | Free Full Text
  • 52.  Chubinskaya S, Rueger DC: BMP Signaling in Articular Cartilage Repair and Regeneration: Potential Therapeutic Opportunity for Osteoarthritis. In Bone Morphogenetic Proteins: Systems Biology Regulators. Springer, 2017; 171–185. Publisher Full Text
  • 53.  Murphy MK, Huey DJ, Hu JC, et al.: TGF-β1, GDF-5, and BMP-2 stimulation induces chondrogenesis in expanded human articular chondrocytes and marrow-derived stromal cells. Stem Cells. 2015; 33(3): 762–73. PubMed Abstract | Publisher Full Text
  • 54.  Martin I, Suetterlin R, Baschong W, et al.: Enhanced cartilage tissue engineering by sequential exposure of chondrocytes to FGF-2 during 2D expansion and BMP-2 during 3D cultivation. J Cell Biochem. 2001; 83(1): 121–8. PubMed Abstract | Publisher Full Text
  • 55.  Wang X, Wenk E, Zhang X, et al.: Growth factor gradients via microsphere delivery in biopolymer scaffolds for osteochondral tissue engineering. J Control Release. 2009; 134(2): 81–90. PubMed Abstract | Publisher Full Text | Free Full Text
  • 56.  Spiller KL, Liu Y, Holloway JL, et al.: A novel method for the direct fabrication of growth factor-loaded microspheres within porous nondegradable hydrogels: controlled release for cartilage tissue engineering. J Control Release. 2012; 157(1): 39–45. PubMed Abstract | Publisher Full Text
  • 57.  Wang X, Liu Z, Pang Y: Concentration gradient generation methods based on microfluidic systems. RSC Adv. 2017; 7: 29966–84. Publisher Full Text
  • 58.  Samorezov JE, Alsberg E: Spatial regulation of controlled bioactive factor delivery for bone tissue engineering. Adv Drug Deliv Rev. 2015; 84: 45–67. PubMed Abstract | Publisher Full Text | Free Full Text | F1000 Recommendation
  • 59.  Bernhard JC, Vunjak-Novakovic G: Should we use cells, biomaterials, or tissue engineering for cartilage regeneration? Stem Cell Res Ther. 2016; 7(1): 56. PubMed Abstract | Publisher Full Text | Free Full Text
  • 60.  Tong X, Jiang J, Zhu D, et al.: Hydrogels with Dual Gradients of Mechanical and Biochemical Cues for Deciphering Cell-Niche Interactions. ACS Biomater Sci Eng. 2016; 2(5): 845–52. Publisher Full Text | F1000 Recommendation
  • 61.  Tam RY, Smith LJ, Shoichet MS: Engineering Cellular Microenvironments with Photo- and Enzymatically Responsive Hydrogels: Toward Biomimetic 3D Cell Culture Models. Acc Chem Res. 2017; 50(4): 703–13. PubMed Abstract | Publisher Full Text | F1000 Recommendation
  • 62.  Park JY, Yoo SJ, Hwang CM, et al.: Simultaneous generation of chemical concentration and mechanical shear stress gradients using microfluidic osmotic flow comparable to interstitial flow. Lab Chip. 2009; 9(15): 2194–202. PubMed Abstract | Publisher Full Text
  • 63.  Yang J, Zhang YS, Yue K, et al.: Cell-laden hydrogels for osteochondral and cartilage tissue engineering. Acta Biomater. 2017; 57: 1–25. PubMed Abstract | Publisher Full Text | Free Full Text
  • 64.  Harada A: Supramolecular Hydrogels. In: Kobayashi S, Müllen K, editors. Encyclopedia of Polymeric Nanomaterials. Berlin, Heidelberg: Springer Berlin Heidelberg; 2014; 1–7. Publisher Full Text
  • 65.  Alakpa EV, Jayawarna V, Lampel A, et al.: Tunable Supramolecular Hydrogels for Selection of Lineage-Guiding Metabolites in Stem Cell Cultures. Chem. 2016; 1(2): 298–319. Publisher Full Text | F1000 Recommendation
  • 66.  Jayawarna V, Richardson SM, Hirst AR, et al.: Introducing chemical functionality in Fmoc-peptide gels for cell culture. Acta Biomater. 2009; 5(3): 934–43. PubMed Abstract | Publisher Full Text
  • 67.  Thorpe SD, Nagel T, Carroll SF, et al.: Modulating gradients in regulatory signals within mesenchymal stem cell seeded hydrogels: a novel strategy to engineer zonal articular cartilage. PLoS One. 2013; 8(4): e60764. PubMed Abstract | Publisher Full Text | Free Full Text
  • 68.  Cigan AD, Nims RJ, Albro MB, et al.: Insulin, ascorbate, and glucose have a much greater influence than transferrin and selenous acid on the in vitro growth of engineered cartilage in chondrogenic media. Tissue Eng Part A. 2013; 19(17–18): 1941–8. PubMed Abstract | Publisher Full Text | Free Full Text
  • 69.  Gupta V, Mohan N, Berkland CJ, et al.: Microsphere-Based Scaffolds Carrying Opposing Gradients of Chondroitin Sulfate and Tricalcium Phosphate. Front Bioeng Biotechnol. 2015; 3: 96. PubMed Abstract | Publisher Full Text | Free Full Text
  • 70.  Mohan N, Gupta V, Sridharan B, et al.: The potential of encapsulating "raw materials" in 3D osteochondral gradient scaffolds. Biotechnol Bioeng. 2014; 111(4): 829–41. PubMed Abstract | Publisher Full Text | Free Full Text
  • 71.  Sridharan B, Mohan N, Berkland CJ, et al.: Material characterization of microsphere-based scaffolds with encapsulated raw materials. Mater Sci Eng C Mater Biol Appl. 2016; 63: 422–8. PubMed Abstract | Publisher Full Text | Free Full Text

Comments on this article Comments (0)

Version 2
VERSION 2 PUBLISHED 20 Dec 2017
Comment
Author details Author details
Competing interests
Grant information
Article Versions (2)
Copyright
Download
 
Export To
metrics
Views Downloads
F1000Research - -
PubMed Central
Data from PMC are received and updated monthly.
 - -
Citations
SEE MORE DETAILS
CITE
how to cite this article
Gadjanski I. Recent advances on gradient hydrogels in biomimetic cartilage tissue engineering [version 1; peer review: 2 approved]. F1000Research 2017, 6(F1000 Faculty Rev):2158 (https://doi.org/10.12688/f1000research.12391.1)
NOTE: If applicable, it is important to ensure the information in square brackets after the title is included in all citations of this article.
track
receive updates on this article
Track an article to receive email alerts on any updates to this article.

Open Peer Review

Current Reviewer Status: ?
Key to Reviewer Statuses VIEW
ApprovedThe paper is scientifically sound in its current form and only minor, if any, improvements are suggested
Approved with reservations A number of small changes, sometimes more significant revisions are required to address specific details and improve the papers academic merit.
Not approvedFundamental flaws in the paper seriously undermine the findings and conclusions
Version 1
VERSION 1
PUBLISHED 20 Dec 2017
Views
0
Cite
Reviewer Report 20 Dec 2017
Matthew J. Dalby, Institute of Molecular, Cell and Systems Biology, University of Glasgow, Glasgow, UK 
Approved
VIEWS 0
https://doi.org/10.5256/f1000research.13419.r28960
I confirm that I have read this submission and believe that I have an ... Continue reading
CITE
CITE
HOW TO CITE THIS REPORT
Dalby MJ. Reviewer Report For: Recent advances on gradient hydrogels in biomimetic cartilage tissue engineering [version 1; peer review: 2 approved]. F1000Research 2017, 6(F1000 Faculty Rev):2158 (https://doi.org/10.5256/f1000research.13419.r28960)
The direct URL for this report is:
https://f1000research.com/articles/6-2158/v1#referee-response-28960
NOTE: it is important to ensure the information in square brackets after the title is included in all citations of this article.
Report a concern
Views
0
Cite
Reviewer Report 20 Dec 2017
Stephanie J. Bryant, Department of Chemical and Biological Engineering, University of Colorado, Boulder, Boulder, Colorado, USA 
Approved
VIEWS 0
https://doi.org/10.5256/f1000research.13419.r28959
I confirm that I have read this submission and believe that I have an ... Continue reading
CITE
CITE
HOW TO CITE THIS REPORT
Bryant SJ. Reviewer Report For: Recent advances on gradient hydrogels in biomimetic cartilage tissue engineering [version 1; peer review: 2 approved]. F1000Research 2017, 6(F1000 Faculty Rev):2158 (https://doi.org/10.5256/f1000research.13419.r28959)
The direct URL for this report is:
https://f1000research.com/articles/6-2158/v1#referee-response-28959
NOTE: it is important to ensure the information in square brackets after the title is included in all citations of this article.
Report a concern

Comments on this article Comments (0)

Version 2
VERSION 2 PUBLISHED 20 Dec 2017
Comment

Open Peer Review

Reviewer Status

Alongside their report, reviewers assign a status to the article:

Approved
The paper is scientifically sound in its current form and only minor, if any, improvements are suggested
Approved with reservations
A number of small changes, sometimes more significant revisions are required to address specific details and improve the papers academic merit.
Not approved
Fundamental flaws in the paper seriously undermine the findings and conclusions

Reviewer Reports

Invited Reviewers
1 2
Version 2
(revision)
 28 Jun 18
Version 1
20 Dec 17 		read read
  1. Stephanie J. Bryant, University of Colorado, Boulder, Boulder, USA
  2. Matthew J. Dalby, University of Glasgow, Glasgow, UK

Comments on this article

All Comments(0)

Add a comment
Sign up for content alerts

Browse by related subjects

    keyboard_arrow_left Back to all reports
    keyboard_arrow_left Back to all reports
    Alongside their report, reviewers assign a status to the article:
    Approved - the paper is scientifically sound in its current form and only minor, if any, improvements are suggested
    Approved with reservations - A number of small changes, sometimes more significant revisions are required to address specific details and improve the papers academic merit.
    Not approved - fundamental flaws in the paper seriously undermine the findings and conclusions
    Sign In
    If you've forgotten your password, please enter your email address below and we'll send you instructions on how to reset your password.

    The email address should be the one you originally registered with F1000.
    Email address not valid, please try again

    You registered with F1000 via Google, so we cannot reset your password.

    To sign in, please click here.

    If you still need help with your Google account password, please click here.

    You registered with F1000 via Facebook, so we cannot reset your password.

    To sign in, please click here.

    If you still need help with your Facebook account password, please click here.

    Code not correct, please try again
    Email us for further assistance.
    Server error, please try again.